 Igloo 7700 MC |
|
|
|
| |
 Installation |
|
| |
 |
|
|
Step 1
Remove the Retention Frame.
|
|
|
|
|
|
|
|
| |
 |
|
 |
Step 2
Check if the main board is the standard back plate by measuring the height of your
screw post: A screw post of a standard back plate is about 5 mm higher than a
main board. Please follow Step 4, if your back plate is a standard one, otherwise
begin with Step 3 and replace with a standard back plate which is prepared in the
packing box.
|
|
|
|
|
|
| |
 |
|
 |
Step 3
Use the standard back plate in
the
package box.
|
|
Step 4
Take off the plastic cover and put the
cooler
above the CPU (The bottom of
the fastener can
be taken apart and
adjust the cooler position to
keep
with the direction of air flow field. We
strongly recommend that the cooler
installation
should be coincided with
our proposed air flow
field direction in
order to reach the optimal
cooling effect.
See the airflow direction diagram
shown
at left corner above.) |
|
|
|
|
|
| |
 |
|
|
Step 5
Install hexagon screws on both right and
left sides, tight up both screws evenly with a hexagon wrench (do not screw only one side in).
|
|
|
|
|
|
| |
 |
|
 |
Step 6
Place the fan speed controller onto the free floppy of the case.
|
|
|
|
|
|
| |
 |
|
|
Step 7
Connect the cooler power cable with the
connector of the fan speed controller.
|
|
Step 8
Insert the other connector of the fan speed
controller into the main board. The installation
has been finished.
|
|
|
|
|
|
| |
|
|
| |
uninstallation |
|
| |
 |
|
 |
Step 1
Remove the connector of the fan speed
controller from the main board. |
|
Step 2
Then remove the cooler power cable from the
connector of the fan speed controller. |
|
|
|
|
|
| |
 |
|
 |
Step 3
Take off the hexagon screws evenly from
both right and left sides with a hexagon
wrench (do not take off only on a single
side). |
|
Step 4
Remove the cooler from the socket. |
|
|
|
|
|
| |
|
|
|
Step 5
Remove the fan speed controller. The dismantlement is finished. |
|
|
| |
|
|
| |
|
|
| |
<<back |
|
| |
|
|
| |
|
|
| |
GlacialTech is dedicated to delivering the highest level customer service possible. We realize that our product's proper functionality is crucial to your system's operation.
Our knowledgeable and friendly support team is ready to respond to your questions regarding product operation and service within one business day.
Got a question or a problem? We want to hear about it :
 support@GlacialTech.com |
|
Support & Service